10 17

WHEEL HORSE WHEEL BEARINGS. WHEEL BEARINGS


WHEEL HORSE WHEEL BEARINGS. OFF ROAD WHEELS ACCESSORIES. SMART CYCLE HOT WHEELS GAME



Wheel Horse Wheel Bearings





wheel horse wheel bearings






    wheel bearings
  • The assemblies that permit smooth rotation between the wheel hub and spindle.





    horse
  • Provide (a person or vehicle) with a horse or horses

  • solid-hoofed herbivorous quadruped domesticated since prehistoric times

  • provide with a horse or horses

  • a padded gymnastic apparatus on legs











wheel horse wheel bearings - DELTA 28-682




DELTA 28-682 18-Inch 2-Horsepower Woodworking Band Saw with Ball Bearing Guides, 230-Volt 1 Phase


DELTA 28-682 18-Inch 2-Horsepower Woodworking Band Saw with Ball Bearing Guides, 230-Volt 1 Phase



The DELTA 28-682 18-Inch 2 HP Woodworking Band Saw with Ball Bearing Guides is constructed with a 17.5-inch throat and features an impressive 12-inch resaw capacity under its roller guide bearings. The band saw is constructed with a powerful 2 HP, 230-volt single-phase motor that reduce vibrations for cleaner cuts. A patented rapid Release tension lever easily changes blade and adjusts blade tension, with a maximum possible blade width of 1-1/4 inches. It also preserves the integrity of the blade while the machine is not in operation. Curve and bevel cutting are simple tasks with the saw's 17-3/4-by-18-inch cast-iron table. The multi-locking table stands approximately 41-inches tall, tilts up to 49-degrees to the left and 8-degrees to the right, and comes with extension wings. Fully adjustable upper and lower blade guides support the platinum blade for accurate cutting.
The saw includes a two-speed pulley system, 18-inch cast-iron wheels, polyurethane compound tires, a rip fence with guide bar, and rare but highly useful dual 4-inch integral dust ports. Blade guides, wrenches, and wheel brushes are also included.










85% (14)





DSC07069.JPG




DSC07069.JPG





Life at Perry Hall 1924 - 1949
J. Adam Plummer

William and Eva Plummer were married in June 1925 and moved into the Perry Hall Mansion. Margaret (Schneider) Plumer (Adam's grandmother) and two aunts and uncle; Clara Plumer, Louise Plumer and Joseph Plumer also lived there at that time. This living arrangement must have lasted only a few years for two aunts and grandmother had a new house built on Plumer Avenue near St. Joseph's Church a few years later. Possibly Anna Plumer Koelber and her husband were to become part of the farm operation; this did not materialize; they later established residence on a Ridge Road farm.

Adam was born in the Perry Hall Mansion; not in a hospital. This occurred in the northeast room on the second floor of the higher portion of the house [ middle floor window on the right ]. First memories of this room was that its color was a light green. In childhood years was told that paint was calcimine and it did brush off on person's clothes. The door was always kept closed in later years. Adam's sister, Sybilla, was also born at Perry Hall and their sister Mary was born at their grandmother Heil's home near Fullerton. When Adam was in high school an English teacher advised that the pronouncement of the name Plumer was different from the way it was done by the family; therefore, the change in spelling [ from Plumer to Plummer ] . At the time of the birth of Adam the doctor who was in attendance inadvertently recorded with the Vital Statistics Department the spelling of the family name as Plummer rather than Plumer. This was not known for some years. Some of the decendants of Edward still use the original spelling.

This was a 204 acre farm which contained a large bank barn along with other associated buildings. Approximate 100 acres were in woodland on the steep slope to the Gunpowder Falls to the north; the balance was tillable farm lands and pasture. I recall seeing a cow and three horses on the farm in the very early thirties. Wheat and other related crops provded food for the livestock and other crops for family food and income. Small grain was threshed on the farm by Ed Simms of the local area who used and old International Harvester gasoline tractor that looked like a steam engine. One would hear it coming as it moved very slowly from the adjoining Dreyer Farm on Perry Hall Road. Potatoes, turnips and carrots were the primary crops grown in the 1930's using local seasonal help to harvest those crops. Turnips and carrots were harvested in late fall, buried in earthen kilns and in very late winter were removed, washed and then sent to market. At some point in time it was said that the carrots were fed to race horses.

I recall a large spreading oak tree which was located about 150 feet northwest of the house. Its spread must have been close to 75 feet. As a child I was not permitted under this tree for it was hollow and it was feared the long outstretched limbs would come crashing down. This tree must have been removed in the late 1930's for I recall men working in the area and a large fire burning in the still standing old trunk of the tree. In the mind of a child, this fire burned for a long time. Near the southeast corner of the house was a very large spreading beech tree. As a child I recall the roots surrounding the tree and suckers growing from them making it very difficult to get close to the trunk of the tree. Just south of the house (100 ft or so) grew two very tall spruce trees; the family always called them pine trees. The area surrounding the house, considered the lawn, was not kept cut in those early years. This was possibly the reason one would find an occasional copperhead snake in the basement of the house. The surrounding farm was well populated with various kinds of snakes which were encountered often. Also regular visits from fox, ground hog, and skunk were frequent.

I recall the walls of Perry Hall mansion were on the same points as that of the compass; i.e. the north wall faced north, etc. Perry Hall Mansion had fifteen rooms as large as 20 x 20 feet with 12 foot ceilings in the lower part of the house and 14 foot ceilings in the taller part of the house with a fireplace in each room. There is a large open staircase that begins on the main floor next to the main hall and proceeds to the third floor. The main hall measured 20" x 40" and had two entrances to the porch. The porch began on the south side of the house and continued on the east and then to the north sides. In addition, to these entrances there were two sets of French doors on the east wall of the house [ here, on the first floor ]. The main hall was not used in the years the Plummer family lived there. In the early years old wall paper was coming off the walls; one would see the strips of the paper hanging from the walls and ceilings. Of course there was no paint under that paper; some sight! A number of the rooms were like this in the earliest year











Adam Plummer, 1941




Adam Plummer, 1941





Life at Perry Hall 1924 - 1949
J. Adam Plummer

William and Eva Plummer were married in June 1925 and moved into the Perry Hall Mansion. Margaret (Schneider) Plumer (Adam's grandmother) and two aunts and uncle; Clara Plumer, Louise Plumer and Joseph Plumer also lived there at that time. This living arrangement must have lasted only a few years for two aunts and grandmother had a new house built on Plumer Avenue near St. Joseph's Church a few years later. Possibly Anna Plumer Koelber and her husband were to become part of the farm operation; this did not materialize; they later established residence on a Ridge Road farm.

Adam was born in the Perry Hall Mansion; not in a hospital. This occurred in the northeast room on the second floor of the higher portion of the house. First memories of this room was that its color was a light green. In childhood years was told that paint was calcimine and it did brush off on person's clothes. The door was always kept closed in later years. Adam's sister, Sybilla, was also born at Perry Hall and their sister Mary was born at their grandmother Heil's home near Fullerton. When Adam was in high school an English teacher advised that the pronouncement of the name Plumer was different from the way it was done by the family; therefore, the change in spelling [ from Plumer to Plummer ] . At the time of the birth of Adam the doctor who was in attendance inadvertently recorded with the Vital Statistics Department the spelling of the family name as Plummer rather than Plumer. This was not known for some years. Some of the decendants of Edward still use the original spelling.

This was a 204 acre farm which contained a large bank barn along with other associated buildings. Approximate 100 acres were in woodland on the steep slope to the Gunpowder Falls to the north; the balance was tillable farm lands and pasture. I recall seeing a cow and three horses on the farm in the very early thirties. Wheat and other related crops provded food for the livestock and other crops for family food and income. Small grain was threshed on the farm by Ed Simms of the local area who used and old International Harvester gasoline tractor that looked like a steam engine. One would hear it coming as it moved very slowly from the adjoining Dreyer Farm on Perry Hall Road. Potatoes, turnips and carrots were the primary crops grown in the 1930's using local seasonal help to harvest those crops. Turnips and carrots were harvested in late fall, buried in earthen kilns and in very late winter were removed, washed and then sent to market. At some point in time it was said that the carrots were fed to race horses.

I recall a large spreading oak tree which was located about 150 feet northwest of the house. Its spread must have been close to 75 feet. As a child I was not permitted under this tree for it was hollow and it was feared the long outstretched limbs would come crashing down. This tree must have been removed in the late 1930's for I recall men working in the area and a large fire burning in the still standing old trunk of the tree. In the mind of a child, this fire burned for a long time. Near the southeast corner of the house was a very large spreading beech tree. As a child I recall the roots surrounding the tree and suckers growing from them making it very difficult to get close to the trunk of the tree. Just south of the house (100 ft or so) grew two very tall spruce trees; the family always called them pine trees. The area surrounding the house, considered the lawn, was not kept cut in those early years. This was possibly the reason one would find an occasional copperhead snake in the basement of the house. The surrounding farm was well populated with various kinds of snakes which were encountered often. Also regular visits from fox, ground hog, and skunk were frequent.

I recall the walls of Perry Hall mansion were on the same points as that of the compass; i.e. the north wall faced north, etc. Perry Hall Mansion had fifteen rooms as large as 20 x 20 feet with 12 foot ceilings in the lower part of the house and 14 foot ceilings in the taller part of the house with a fireplace in each room. There is a large open staircase that begins on the main floor next to the main hall and proceeds to the third floor. The main hall measured 20" x 40" and had two entrances to the porch. The porch began on the south side of the house and continued on the east and then to the north sides. In addition, to these entrances there were two sets of French doors on the east wall of the house [ here, on the first floor ]. The main hall was not used in the years the Plummer family lived there. In the early years old wall paper was coming off the walls; one would see the strips of the paper hanging from the walls and ceilings. Of course there was no paint under that paper; some sight! A number of the rooms were like this in the earliest years of my childhood. There was no central heat in the house, just a wood stove f









wheel horse wheel bearings








wheel horse wheel bearings




Swisher 60-Inch 14.5 HP Trailmower T14560






If you have a big mowing job you need a Swisher Trailmower . Designed to dramatically reduce mowing time, Trailmowers attach to your ATV, lawn tractor or other utility vehicle and are the ultimate time-savers for large lawns and meadows. U.S.A.

Not for sale in CA Engine: Briggs & Stratton, HP: 14 1/2, Cutting Width (in.): 60, Cutting Height (in.): 1 1/2 - 4 1/2, Start Type: Electric, Blades (qty.): 3, Discharge: Side, Offset: Left or right, Dimensions L x W x H (in.): 24 x 26 x 21

Designed to dramatically reduce mowing time, the Swisher Trailmower attaches to ATV's, lawn tractors and other utility vehicles to cut large lawns and meadows fast. Three blades are powered by a 14-1/2-horsepower, Briggs and Stratton I/C OHV engine for finish-cut quality, every mowing. A sixty-inch, side-discharge cutting deck cuts wide swaths and spreads the grass out to avoid choking. An offset adjustment is simple to use for mowing in ditches and cutting grass under low-hanging trees. And, a floating deck reduces scalping for professional mowing results, even on tricky terrain. Cutting-height adjustment handles are easy to control for just the right cut. No more pulling on that cord in the hot sun. This Swisher is equipped with a handy 12-volt key starter, so firing up the mower is a snap, rather than a big workout. Convenient blade-engage/disengage controls mean no more cuts in the garden hoses. Always with a keen eye for safety, Swisher equipped the Trailmower with an automatic lock-out so the mower can't run without an operator. A universal articulating hitch attaches to any hitch system and lets the mower maneuver easily behind whatever is pulling it. And, an exclusive bumper/roller system protects against damage to tree roots and shrubs. One more nice feature: A large 2-gallon fuel tank means less downtime and more productivity for getting that mow job done fast, and getting back to your weekend. --Brian Olson










See also:

make spinning wheel

big longboard wheels

lawn cart wheels

waiters on wheels

homemade motorcycle wheel chock

toro wheel horse 110 4

wonder wheel wiki



Comment
Trackback
Comment form
 Only the blog author may view the comment.

Author:4 wheel alignment procedure
Welcome to FC2!

Profile
Latest comments
Latest trackbacks
Monthly archive

Page Top
Powered by FC2 Blog | | Template Design by スタンダード・デザインラボ